3 Series E46 316i (M43TU) SAL
17 11 370
Removing and installing/replacing cooling
loop for power steering
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Note:
After completing this operation, check fluid level in tank of power
steering system.
Remove and install radiator.
Lever out expansion rivet (1).
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
19.01.2013 11:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
