3 Series E46 316i (M43TU) SAL
Installation:
Press center bearing (2) into transmission tunnel.
Lower transmission until cylinder head touches bulkhead.
Suspend special tool 11 8 022 from left and right control arms.
Caution!
Position special tool so that engine oil sump is securely
resting on special tool.
Tighten down knurled screws until special tool rests against
engine oil sump.
Turn fastener (1) to left.
Disconnect plug (2).
Unclip cable from transmission housing.
Installation:
Attach plug (2) so that marking lines are flush with respect to
each other.
Detach cable plug (1) from speed sensor.
Unclip cable from transmission housing.
RA Removing and installing automatic transmission (A4S 310R)
BMW AG - TIS
19.01.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
