3 Series E46 316i (M43TU) SAL
Unlock and detach cable plug (1) from position switch.
Unclip cable from transmission housing.
Release oil cooler line clamp on crankcase and oil sump.
Release screw connection on oil cooler line.
Tightening torque, 17 22 5AZ.
Installation:
Replace sealing ring (1).
Release screw connection on oil cooler line at rear.
Tightening torque, 17 22 6AZ.
Installation:
Replace seal.
RA Removing and installing automatic transmission (A4S 310R)
BMW AG - TIS
19.01.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -