3 Series E46 316i (M43TU) SAL
Remove cover.
Release retaining screws on torque converter (3 screws) with
special tool 24 1 110.
Tightening torque, 24 40 1AZ.
Installation:
Use only original screws.
Protect torque converter from slipping out. To do so, insert special
tools 24 4 131 and 24 4 133 in opening in transmission
housing.
Clamp torque converter.
Release screws.
Tightening torque, 24 00 1AZ.
Pull off transmission from engine towards rear and lower it.
RA Removing and installing automatic transmission (A4S 310R)
BMW AG - TIS
19.01.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
