3 Series E46 316i (M43TU) SAL
24 35 600
Replacing transmission switch (A5S 360R /
390R, A4S 200R)
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid in this automatic
transmission.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Move selector lever to position "D".
•
Remove transmission oil sump.
•
Remove and install selector unit.
Grip clamping sleeve (1).
Slacken nut (2).
Tightening torque 25 16 2AZ .
Release nut (4).
Tightening torque, 25 16 1AZ .
Remove selector lever (3).
Installation:
Adjust selector lever
RA Replacing transmission switch (A5S 360R / 390R, A4S 200R)
BMW AG - TIS
19.01.2013 12:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
