3 Series E46 316i (M43TU) SAL
Disconnect all plug connections on shift unit.
Unclip temperature sensor (1) from holder.
Note:
As of model year 2001 (04/2000), the temperature sensor is
integrated in the wiring harness.
Remove retaining clip with screwdriver (2). Insert transmission
plug (1) in transmission.
Remove wiring harness from automatic transmission.
Installation:
To facilitate installation, coat sealing rings with petroleum jelly.
Make sure transmission plug is in correct position.
RA Replacing wiring harness in automatic transmission (A5S 360R/390R, A4S 200R)
BMW AG - TIS
19.01.2013 12:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
