3 Series E46 316i (M43TU) SAL
25 16 056
Removing and installing / replacing shift
tower (Steptronic)
Caution!
Do not disassemble new Steptronic shift tower.
Note:
Identifying features of new Steptronic shift tower:
1= Position, solenoid valve
2= Black plastic section
3= Aluminum section
Note:
Move selector lever to park position "P".
Remove transmission underbody protection if necessary.
Brace clamping piece (1) and slacken nut (2).
Installation:
Adjust selector lever.
RA Removing and installing / replacing shift tower (Steptronic)
BMW AG - TIS
19.01.2013 12:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
