3 Series E46 316i (M43TU) SAL
Lever trim (1) out of center console, disconnect cable plugs (2 ...
3) and remove trim (1).
Remove storage tray (1).
Release screws.
Pull support member (1) slightly out of center console.
Depending on equipment, press fitted switches (2) forwards out of
support member (1) and disconnect.
On rear side of support member (1), disconnect cable plug from
cigarette lighter and ashtray light.
Remove support member (1).
RA Removing and installing/replacing shift tower
BMW AG - TIS
19.01.2013 12:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -