3 Series E46 316i (M43TU) SAL
31 35 000
Removing and installing/replacing front
stabilizer
Necessary preliminary tasks:
•
Remove underbody protective plate
•
Remove stabilizer link on both sides from stabilizer
Unscrew nuts.
Remove stabilizer from engine carrier.
Installation:
Check rubber mount on both sides, replace if necessary.
Replace self-locking nuts.
Tightening torque 31 35 1AZ
.
Replacement:
Remove rubber mount on both sides from stabilizer.
RA Removing and installing/replacing front stabilizer
BMW AG - TIS
19.01.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
