3 Series E46 316i (M43TU) SAL
31 35 005
Removing and installing/replacing push rod
(stabilizer link) for left/right stabilizer
Release nut; if necessary, grip with open-end wrench.
Remove stabilizer link (1) from stabilizer (2).
Installation:
Replace self-locking nut.
Tightening torque 31 35 5AZ
.
Release nut; if necessary, grip with open-end wrench.
Remove stabilizer link from spring strut.
Installation:
Replace self-locking nut.
Tightening torque 31 35 5AZ
.
RA Removing and installing/replacing push rod (stabilizer link) for left/right stab
BMW AG - TIS
19.01.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
