3 Series E46 316i (M43TU) SAL
Installation:
If necessary, replace and grease guide bushings (Glissando, refer
to BMW Parts Service).
Press down both locking hooks.
Detach steering angle sensor.
Installation:
Locking element (1) must engage in steering angle sensor!
Both locking hooks (2) must be snapped into place.
Installation:
Push in steering spindle upper section until stop.
Locate special tool 32 3 040 with steering angle sensor. Both
lugs (1) of special tool must engage in openings of bearing (2).
Push on steering angle sensor.
RA Disassembling and assembling steering column
BMW AG - TIS
19.01.2013 12:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
