3 Series E46 316i (M43TU) SAL
Unscrew nut (1).
Remove screw (3) with washer (2).
Installation:
Screw (3) must fit in both guide Guide bushes. Install nut with
Loctite.
Tightening torque: 32 31 8AZ
Remove mounting plate (1) and mounting bracket (2).
Installation:
Insert mounting bracket (2) into guide of mounting plate (1).
Installation:
Replace sliding blocks (1) and stop buffer (2) if necessary.
Installation:
Replace stop element (1) and friction plate (2) if necessary.
Do not grease friction plate (2).
RA Disassembling and assembling steering column
BMW AG - TIS
19.01.2013 12:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
