3 Series E46 316i (M43TU) SAL
33 10 010
Removing and installing/replacing rear
differential
Special tools required:
•
33 4 420
Important!
Use only approved rear differential oils!
Necessary preliminary tasks:
•
Remove tension strut and insert bolts for rear axle carrier at
front until contact is made
•
Remove propeller shaft on final drive.
•
Remove output shaft from rear differential at both ends and
tie back
•
Except E46/5 (Compact): Remove rear stabilizer
E46/5 (Compact):
Remove spare wheel.
Release screws (1) on spare wheel holder.
Tilt spare wheel holder (1) downwards.
RA Removing and installing/replacing rear differential
BMW AG - TIS
19.01.2013 13:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
