3 Series E46 316i (M43TU) SAL
33 32 671
Replacing one rubber mount in the upper
control arm (control arm removed)
Special tools required:
•
33 3 351
•
33 3 352
Press rubber mount with special tools 33 3 351 and 33 3 352
out of upper control arm.
Place new rubber mount at chamfered end of control arm bore.
Here, longer collar (A = 17 mm) of rubber mount must point
upwards.
Press in rubber mount with special tools 33 3 351 and
33 3 352 until flush.
After installation:
•
Perform chassis alignment check
RA Replacing one rubber mount in the upper control arm (control arm removed)
BMW AG - TIS
19.01.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
