3 Series E46 316i (M43TU) SAL
33 32 681
Replacing one rubber mount in lower control
arm (control arm removed)
Special tools required:
•
33 3 351
•
33 3 352
•
33 3 353
•
33 3 354
Attach special tool 33 3 354 between both control arms.
Press rubber mount with special tools 33 3 351 and 33 3 352
out of lower control arm.
Attach special tool 33 3 354 between both control arms.
Press in new rubber mount (1) with special tools 33 3 351
and 33 3 353 .
After installation:
•
Perform chassis alignment check
RA Replacing one rubber mount in lower control arm (control arm removed)
BMW AG - TIS
19.01.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
