3 Series E46 316i (M43TU) SAL
33 32 ...
Replacing both eccentric bolts
Necessary preliminary tasks:
•
Remove rear wheel.
Support trailing arm from underneath using a workshop jack.
Mark position of eccentric washer (2) to control arm.
Release nut (1) and remove eccentric washer (2).
Replace eccentric bolt (4).
Fit eccentric washer (2).
Align eccentric bolt (4) by way of marking on eccentric
washer (2) to control arm.
Note:
Eccentric bolt (4) and eccentric washer (2) must rest between
stops (3) on control arm.
Replace nut (1).
Tightening torque 33 32 11AZ
.
RA Replacing both eccentric bolts
BMW AG - TIS
19.01.2013 13:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
