bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Checking Service Brake_ High- And Low-pressure Tests > < 10 RA Bleeding Brake System With DSC3|Page 1572
Page 1
background image

34 00 513

Checking parking brake setting (for
inspection)

Note:

If deviations are identified during the following check, the
parking brake must be adjusted:

E46: refer to 34 10 014

E39, E52 and E53: refer to 34 10 014

E38: refer to 34 41 006

E46/E39/E53/E52

Release handbrake lever; it must be possible to turn wheels
easily.

Switch ignition on; indicator light must not be on when handbrake
lever is released.

1st tooth: No braking effect, but indicator lamp can be lit.

2nd tooth: Braking effect must begin, indicator lamp must light up.

E38

Release handbrake lever; it must be possible to turn wheels
easily.

Switch ignition off; indicator light must go off when handbrake
lever is released.

1st tooth: No braking effect, but indicator lamp can be lit.

2nd tooth: Braking effect can begin, indicator lamp must light up.

3rd tooth: Braking effect must begin, indicator lamp must light up.

RA  Checking parking brake setting (for inspection)

BMW AG - TIS

19.01.2013  13:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Checking Service Brake_ High- And Low-pressure Tests > < 10 RA Bleeding Brake System With DSC3|Page 1572