3 Series E46 316i (M43TU) SAL
34 21 745
Removing and installing/replacing left or right
rear brake caliper
Remove rear wheel.
Caution!
After completing tasks, bleed brake system.
Apply pedal prop and depress brake pedal slightly. This prevents
brake fluid from emerging from the expansion tank and air from
entering the brake system when the brake lines are opened.
Release screws (1).
Installation:
Tightening torque, 34 21 3AZ .
Disconnect brake hose (2).
Unfasten brake hose on connection point to brake line.
Right:
Disconnect plug connection for brake lining sensor.
Pull off fist caliper towards rear of vehicle.
Installation:
RA Removing and installing/replacing left or right rear brake caliper
BMW AG - TIS
19.01.2013 13:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
