3 Series E46 316i (M43TU) SAL
34 32 971
Replacing both rear brake hoses
Note:
Note "General înformation",
refer to 34 00 ...
After completing work, bleed brake system,
refer to 34 00 048.
Apply pedal prop and depress brake pedal slightly. This prevents
brake fluid from escaping from expansion tank after brake pipes
have been disconnected (which would enable air to enter the
braking system).
Release union nut (1); to do so, grip brake hose at square drive.
Installation:
Check retaining spring (3), replace if necessary.
Observe Tightening Torque,
refer to 34 32 1AZ.
Remove spring clip (1).
RA Replacing both rear brake hoses
BMW AG - TIS
19.01.2013 13:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
