3 Series E46 316i (M43TU) SAL
Pull lug of brake hose (1) in direction (2) out of fixture and remove
sideways in direction (3) out of fixture.
Installation:
When installing, make sure lug (1) rests against fixture (2).
Slide spring clip (3) into annular groove (4) as far as it will go.
Detach brake hose (1) from brake caliper.
Installation:
Observe Tightening Torque,
refer to 34 32 1AZ.
Installation:
Mount and tighten brake hose on brake caliper first, then on
brake line/brake hose point of connection.
Never twist brake hose when installing it.
RA Replacing both rear brake hoses
BMW AG - TIS
19.01.2013 13:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
