3 Series E46 316i (M43TU) SAL
34 41 120
Removing and installing/replacing both
handbrake bowden cables
Necessary preliminary tasks:
•
Remove complete exhaust system
After completing tasks, adjust handbrake.
Release lock nuts with special tool 34 1 030. Twist lock nuts and
adjusting nuts off handbrake bowden cables.
Installation:
Observe adjusting instructions and lock adjusting nuts with
lock nuts.
Remove heat protection shield (1) on tank.
Pull handbrake Bowden cable (1) out of brackets.
Installation:
Ensure proper routing of handbrake Bowden cables.
RA Removing and installing/replacing both handbrake bowden cables
BMW AG - TIS
19.01.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
