3 Series E46 316i (M43TU) SAL
Replacing hydraulic unit
Release screws (1) and carefully detach control module (2) from
hydraulic unit (3).
Installation:
Replace micro-encapsulated screws.
Observe Tightening Torque,
refer to 34 51 1AZ.
Release screws (1).
Release screw (1) and remove bracket (2) from hydraulic unit (3).
RA Removing and installing / replacing hydraulic unit ABS/ASC+T
BMW AG - TIS
19.01.2013 13:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -