3 Series E46 316i (M43TU) SAL
34 52 550
Removing and installing/replacing DSC yaw
sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove driver's seat
•
Remove footwell trim panel on A-pillar on left
Raise carpet (1).
Move damping lining (2) forwards until yaw sensor (3) is
accessible.
Unfasten screws (1).
Release screws (2) on holder (3).
Important!
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may
be malfunctions in the DSC.
Installation:
Tightening torque, 34 52 4AZ
.
RA Removing and installing/replacing DSC yaw sensor
BMW AG - TIS
19.01.2013 13:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
