3 Series E46 316i (M43TU) SAL
Tilt yaw sensor (1) upwards in direction (2) and remove in
direction (3).
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove yaw sensor from mounting.
Important!
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may
be malfunctions in the DSC.
Installation:
Tightening torque, 34 52 3AZ
.
RA Removing and installing/replacing DSC yaw sensor
BMW AG - TIS
19.01.2013 13:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
