3 Series E46 316i (M43TU) SAL
35 41 010
Removing and installing/replacing accelerator
pedal
Remove trim panel for pedal assembly.
Refer to MG 51.
Disconnect return spring.
Release nuts and pull holder towards interior.
Installation:
Tightening torque = 2.8 Nm.
Press down locking hook and pull accelerator pedal off holder.
Installation:
Check bearing bushings (1), replace if necessary and lightly
grease.
RA Removing and installing/replacing accelerator pedal
BMW AG - TIS
19.01.2013 13:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
