3 Series E46 316i (M43TU) SAL
35 41 421
Replacing Bowden cable for throttle valve
actuation
Adjust throttle cable after installation,
refer to 35 41 ...
Remove panel for pedal assembly,
refer to MG 51.
Remove heater bulkhead,
refer to MG 51.
Engine M43:
Remove cap (1).
Engine M43:
Remove adjusting screw (1) from rubber mount (2). Detach rubber
mount (2) from holder.
Unhook nipple from actuating lever (3).
RA Replacing Bowden cable for throttle valve actuation
BMW AG - TIS
19.01.2013 13:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
