3 Series E46 316i (M43TU) SAL
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Note:
Degrease contact face with universal cleaner, refer to BMW
Parts Service.
Note:
If there are grease residues in the area of the wheel stud
bore, the brake disk must be removed and cleaned.
Remove dirt, grease residues and corrosion from contact face (1)
with a drill and special tool 36 1 250 .
Important!
Do not operate special tool 36 1 250 with an impact
screwdriver!
Note:
Degrease contact face with universal cleaner, refer to BMW
Parts Service.
Check brake disk retaining bolt (1) for secure seating.
Important!
Brake disk retaining bolt must under no circumstances
protrude over contact face (2) between brake disk and disk
wheel.
Tightening torque, brake disk retaining screw,
Front axle, refer to 34 11 1AZ
.
Rear axle, refer to 34 21 1AZ
.
Apply a thin coat of grease to wheel centering (1) in disk wheel.
Note:
Refer to BMW Service Operating Fluids, Main Group 36.
RA Removing or installing front or rear wheel
BMW AG - TIS
19.01.2013 13:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
