3 Series E46 316i (M43TU) SAL
Reinstall straightening support for stabilizer bar, secure engine
support front section in position with straightening angle set.
Bend back areas that have been bent open.
Realign mating surfaces.
Caution!
Secure engine support front section to mating surfaces with
additional inert gas seams.
Weld engine support front section on engine compartment side to
engine support reinforcement and to engine support rear section.
In doing so, secure engine support front section in marked areas
to mating surfaces with additional insert gas seams.
Caution!
Secure engine support front section to mating surfaces with
additional inert gas seams.
RA Replacing engine support front section on right
BMW AG - TIS
19.01.2013 14:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
