3 Series E46 316i (M43TU) SAL
Weld engine support front section on wheel arch side to engine
support reinforcement and to engine support rear section.
In doing so, secure engine support front section in marked areas
to mating surfaces with additional insert gas seams.
Weld engine support front section to wheel arch and to separating
wall reinforcement.
Weld engine support front section to engine support rear section.
Drill holes for plug welding bulkhead reinforcement.
Clean and coat joint surfaces with zinc dust paint.
Install bulkhead reinforcement in wheel arch and weld.
RA Replacing engine support front section on right
BMW AG - TIS
19.01.2013 14:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
