3 Series E46 316i (M43TU) SAL
Fit reinforcement plate at door pillar (A-pillar) with 1/2 width in
connection points of body, locate in position and weld up.
Grind down welded surfaces.
Fit reinforcement plate at C-pillar with 1/2 width each in connection
points of body, locate in position and weld up.
Fit cover for side member spare part.
Mark holes for plug welding reinforcement plates.
Remove cover for side member spare part.
Cut expanded foam of cavity sealing on outside of B-pillar flush
with metal edge of B-pillar.
Fill spare part without cavity acoustic baffle with cavity foam.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
19.01.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
