3 Series E46 316i (M43TU) SAL
Coat connection faces on reinforcement plate and body with zinc
dust paint.
At door pillar spare part (A-pillar), clean connection faces and coat
with zinc dust paint.
Drill holes for plug welding at reinforcement plates, connection
point, cowl panel, top, and cover for side member.
At door pillar spare part (A-pillar), clean connection faces and coat
with zinc dust paint.
Fit reinforcement plates, cowl panel, top and cover for side
member with 1/2 width each in connection points of body, locate in
position and weld up.
Grind down welded surfaces.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
19.01.2013 14:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
