3 Series E46 316i (M43TU) SAL
Install shaped part for cavity acoustic baffle, cowl panel, top:
Procedure and materials,
refer to 41 00 ... Installing shaped parts for cavity acoustic baffle,
except cover for frame member
Short summary:
Gently bend open retaining lug (1) for securing shaped part so
that shaped part can be attached.
Clean bearing surface (2) of shaped part for cavity acoustic baffle
on body and on door pillar (A-pillar) spare part.
Clean shaped part for cavity acoustic baffle (1).
Coat shaped part for cavity baffle (1) with recommended window
adhesive and attach with lug (2) to retaining lug (3).
Bend back retaining lug with shaped part for cavity acoustic baffle
up to bearing surface on door pillar (A-pillar) spare part.
Shaped part for cavity acoustic baffle must be positioned 90
°
to
plate of door pillar (A-pillar).
Check sealing with window adhesive; if necessary, reseal with
window adhesive.
Then place window adhesive on shaped part for cavity acoustic
baffle.
Installing shaped part for cavity sealing, sunroof water drainage
pipe:
Procedure and materials,
refer to 41 00 ... Installing shaped parts for cavity acoustic baffle,
except cover for frame member
Short summary:
Cut off lug.
Protect polished areas against rust.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
19.01.2013 14:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -