3 Series E46 316i (M43TU) SAL
Check fulcrum pads on lower section of trunk lid lock for damage
and replace if necessary.
Remove protective caps from trim panel at rear.
Loosen screws on lower section of trunk lid lock until it can just be
moved, enabling it to center itself.
The lower section of the trunk lid lock must not scrape against the
upper section.
Check stop screw of rear lid:
RA Adjusting trunk lid to fit
BMW AG - TIS
19.01.2013 14:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
