3 Series E46 316i (M43TU) SAL
Place a strip of paper (normal writing paper) (1) between stop
screw (2) and stop on rear lid hinge.
Close trunk lid.
While doing so, make sure paper strip remains between stop
screw and stop on rear lid hinge.
The stop screw is correctly adjusted when the paper strip (1) can
be pulled out "with suction".
This adjustment is made by turning the stop screw.
If the paper strip can be pulled out "with suction", screw in the stop
screw (1) by measurement (B).
Measurement (B) = 2.5 mm, corresponding to 2.5 turns.
The material thickness of the protective cap is compensated for
when the stop screw (1) is screwed in.
RA Adjusting trunk lid to fit
BMW AG - TIS
19.01.2013 14:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
