3 Series E46 316i (M43TU) SAL
51 11 001
Replacing front bumper (up to 9/01)
Unscrew and remove license plate.
Remove complete front bumper,
refer to 51 11 000.
Replace base for license plate,
refer to 51 11 158.
If necessary, remove both fog lamp inserts (complete),
refer to 63 17 000.
Replacing center section of front bumper (support beam):
Release left/right expansion rivets (1).
Release expansion rivets (1) and remove bumper support (2)
towards rear.
Replacement only (bumper center section):
If necessary, release nuts (1) on left/right and remove fanfare (2)
from bumper center section (3).
RA Replacing front bumper (up to 9/01)
BMW AG - TIS
19.01.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
