3 Series E46 316i (M43TU) SAL
Replacement only (bumper center section):
If necessary, release split pins (1) on left/right and remove
installation sleeve (2) from bumper center section (3).
Note:
The work for "Replacing front bumper center section (carrier)"
ends here.
Replacing front bumper (bumper trim):
Remove grill for bumper trim,
refer to 51 11 180.
Remove metal nuts (1) on left/right.
Version with fog lamps:
If necessary, detach retainer (2) for fog lamp.
Detach edge guard (1) from bumper (2).
RA Replacing front bumper (up to 9/01)
BMW AG - TIS
19.01.2013 14:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
