3 Series E46 316i (M43TU) SAL
Release expansion rivet (1) on left/right.
Lift out wheel arch finisher (2) on left/right and pull bumper (3) a
little to rear.
All except Convertible with TV:
Pull off bumper (3) towards rear.
Convertible with TV only:
Remove storage tray in trunk on left.
Disconnect plug connection (1).
Convertible with TV only:
Pull out cable plug with grommet (1) towards rear.
Release nut (2) on left/right.
Pull off bumper (3) towards rear.
RA Removing and installing complete rear bumper
BMW AG - TIS
19.01.2013 14:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
