3 Series E46 316i (M43TU) SAL
51 16 202
Removing and installing/replacing front cup
holder
Removal:
Press sides of oddments tray (1) together and lift out.
Cup holder (1) and oddments tray (2) are now unlocked from
catches (3).
Remove cup holder (1) towards front/top and then remove
oddments tray (2).
Installation:
Guides (1) and supports (2) on left/right on cup holder (3)
must not be damaged.
Installation:
Guides (1) and supports (2) on left/right on oddments tray (3)
must not be damaged.
If necessary, replace fault tension spring (4).
RA Removing and installing/replacing front cup holder
BMW AG - TIS
19.01.2013 14:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
