3 Series E46 316i (M43TU) SAL
Installation:
Insert oddments tray (1) at rear into center console.
Guide (2) must be positioned between supports (3) of centre
console (4), oddments tray (1) can now be snapped down into
place.
Insert cup holder (1) into oddments tray (2).
Guides (3) must be positioned between supports of centre console
(4), cup holder (1) can now be snapped down into place.
Replacement only:
If necessary, lift out rubber tray (1) with special tool 00 9 316
(sealing lip wedge) and remove.
RA Removing and installing/replacing front cup holder
BMW AG - TIS
19.01.2013 14:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
