3 Series E46 316i (M43TU) SAL
51 16 ...
Removing and installing/replacing carrier in
storage tray
Removing insert (compartment) in carrier:
If necessary, open cover (1).
Press insert (2) upwards in center with hand
and simultaneously remove insert (2).
Installation:
Following components on insert (1) must not be damaged:
-
Catches (2), top
-
Guides (3), bottom
-
Catches (4), bottom
Installation:
When installing, press insert (1) downwards in center.
Removing insert (glasses compartment) in carrier:
If necessary, open cover (1).
Press guide of cover (1) in middle with hand towards top and pull
out glasses compartment (2) approx. 2 mm.
RA Removing and installing/replacing carrier in storage tray
BMW AG - TIS
19.01.2013 14:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
