3 Series E46 316i (M43TU) SAL
Press glasses compartment (1) at outside left/right downwards a
little and pull out.
Installation:
Following components on bottom of glasses compartment (6)
must not be damaged:
-
Hold-down elements (1)
-
Guide (2)
-
Guides (3)
-
Catches (4)
-
Contacts (5)
Installation:
Catches (1) on top of glasses compartment (2) must not be
damaged.
Removing carrier:
Remove finisher for storage tray,
refer to 51 16 211.
Release screws (1).
Note:
If only switch (2) for ASC is fitted,
pull out carrier (3) a little.
If seat heating, rear window roller sun blind etc. are fitted,
press out switches from rear to front and disconnect plug
connections.
RA Removing and installing/replacing carrier in storage tray
BMW AG - TIS
19.01.2013 14:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
