3 Series E46 316i (M43TU) SAL
Slacken screw (1).
Lever out lock actuator (2) towards front and remove to inner door
plate.
Note:
2-door and 4-door models have different locking systems.
The locking systems differ in the form of the Bowden cable nipple.
Bowden cable nipple (1) for 4-door model.
Bowden cable nipple (2) for 2-door model.
Installation:
Grommet (3) must be pushed onto end piece (4).
Installation:
If necessary, replace screw (1) on lock actuator (3).
Bowden cable (2) must be correctly engaged with lock actuator
(3).
Installation:
Bowden cable nipple (1) must be correctly fitted in lock actuator
(2) and must not be removed.
RA Removing and installing/replacing outside handle and lock actuator on left or ri
BMW AG - TIS
19.01.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
