bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Removing And Installing Or Replacing Window Cavity Cover Strip On Outside Of Lef > < 16 RA Removing And Installing_replacing Outside Handle And Lock Actuator On Left Or Ri|Page 2272
Page 1
background image

51 21 280

Removing and installing or replacing door
stop on left or right front door

Remove sound insulation in front area only,

refer to 51 48 ...

Raise the door window.

Disconnect battery negative lead.

Unscrew bolt (1).

Remove seal (2) towards rear and detach from door brake (3).

Note:

For removal, fold back screw plate (1).

Release screws (2) and feed out door brake (3) to inner door
panel.

Installation:

If necessary, stick butylene tape (sourcing reference: BMW
Parts Service) between door stop and inner door plate.

Installation:

To install door brake (1), fold back screw plate (2) as shown in
illustration.

RA  Removing and installing or replacing door stop on left or right front door

BMW AG - TIS

19.01.2013  14:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 RA Removing And Installing Or Replacing Window Cavity Cover Strip On Outside Of Lef > < 16 RA Removing And Installing_replacing Outside Handle And Lock Actuator On Left Or Ri|Page 2272