3 Series E46 316i (M43TU) SAL
Release screws (1).
Remove door lock (2) with linkage (3).
Installation:
Insert linkage for locking knob through opening in inner door plate.
Do not bend linkage (3).
Replace screws (1).
Tightening torque 51 21 1AZ.
Important!
Do not close door while installing door lock and lock barrel.
It is not possible to open the door when the adjusting screw is
released.
Secure door against closing.
Installation:
Left door lock of front door:
Slacken adjusting screw (1) on door lock (2) (turn in
counterclockwise direction, as shown in illustration) - this makes
the Bowden cable mount (3) movable.
Coupé/Convertible:
For the Coupé, the door lock (4) is adapted to the different door
geometry.
The illustration shows the left driver's door lock.
The adjusting procedure is identical to that for the Saloon.
Important!
Spring (3) must be fitted and must not be damaged.
1
Bowden cable holder for outside door handle
2
Adjusting screw (4 mm WAF)
RA Removing and installing/replacing door lock in left or right front door (from 09
BMW AG - TIS
19.01.2013 14:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
