3 Series E46 316i (M43TU) SAL
Installation:
Right door lock of front door:
Slacken adjusting screw (1) on door lock (2) (turn in clockwise
direction, as shown in illustration) - this makes the Bowden cable
mount (3) movable.
Note:
The Bowden cable mount (3) is still shown in the illustration as
lock lever (3), but is similar to that in Fig. R51 2804.
Coupé/Convertible:
Lever out sealing cap (1) for following adjustment.
Installation:
After installing lock cylinder (51 21 140) and/or cover
(51 21 180),
lever out sealing cap (2).
Tighten down adjusting screw (2) on door lock and fit sealing
cap (1).
Tightening torque 51 21 4AZ.
Direction of rotation of adjustment screw (1):
Front left door
Front right door
Tighten down adjusting
screw (1)
in clockwise direction, as
shown in illustration.
RA Removing and installing/replacing door lock in left or right front door (from 09
BMW AG - TIS
19.01.2013 14:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
