3 Series E46 316i (M43TU) SAL
Coupé/convertible:
Lever out sealing cap (1) for following adjustment.
Installation:
After installing lock cylinder (51 21 140) and/or cover (51 21
180),
Lever out sealing cap (2).
Tighten down adjusting screw (1) on door lock and fit sealing
cap (2).
Tightening torque, 51 21 4AZ.
Direction of rotation of adjustment screw (1):
Front left door
Front right door
Tighten down adjusting
screw (1) in clockwise
direction, as shown in
illustration.
Tighten down adjusting
screw (1) in
counterclockwise direction.
Caution!
Carry out function check only with door open.
If door is closed
and the setting at the rotary striker lock is incorrect,
it may not be possible to open door any more
and the door trim panel must be destroyed.
RA Removing and installing/replacing door lock in left or right front door (up to 0
BMW AG - TIS
19.01.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
