3 Series E46 316i (M43TU) SAL
51 22 090
Removing and installing/replacing door lock
in left or right rear door (up to 09/00)
Note:
The work is identical for all E46 4-door models up to year of
manufacture 09/2000.
A 4 mm A/F Allen key is required for adjustment.
Raise the door window.
Remove sound insulation on rear door.
Disconnect plug connection (1) on door lock (2).
Release screws (1).
Remove door lock (2) with linkage (3).
Installation:
Insert frame for catch button through opening in inner door panel.
Do not bend linkage (3).
Make sure that the lock lever is inserted between the outside door
handle support member and outer skin.
Replace screws (1).
Tightening torque 51 22 1AZ.
Caution!
Do not close door while installing door lock and cover.
It is not possible to open the door when the adjusting screw is
released.
Secure door against closing.
RA Removing and installing/replacing door lock in left or right rear door (up to 09
BMW AG - TIS
19.01.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
