3 Series E46 316i (M43TU) SAL
Installation:
Left door lock of rear door:
Slacken adjusting screw (1) on door lock (2)
(turn counterclockwise, as shown in illustration),
the lock lever (3) can thus be moved.
Installation:
Right door lock of rear door:
Slacken adjusting screw (1) on door lock (2)
(turn clockwise, as shown in illustration),
the lock lever (3) can thus be moved.
Installation:
Lever out sealing cap (1).
Tighten down adjusting screw (2) on door lock and fit sealing
cap (1).
Tightening torque, 51 22 4AZ.
Direction of rotation of adjustment screw (2):
Left rear door
Right rear door
Tighten down adjusting
screw (2) in clockwise
direction, as shown in
illustration.
Tighten down adjusting
screw (2) in
counterclockwise direction.
RA Removing and installing/replacing door lock in left or right rear door (up to 09
BMW AG - TIS
19.01.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
