3 Series E46 316i (M43TU) SAL
Cut through glue bead all around as close as possible to the rear
window glass.
1.
Body opening
2.
Glue bead
3.
Knife
4.
Rear window
Lift out rear window using special tool 51 3 010.
Cut off old glue in body opening but for a thickness of approx. 0.5
mm.
Cut off old glue carefully with an universal knife (sharp as a razor
blade) to avoid damaging the paint finish in body opening.
Pull off adhesive tapes all round.
Caution!
To provide long-term corrosion inhibition, damage to
paintwork (scratches and large areas of damage) should
always be touched up,
refer to 51 31 ...
RA Removing and installing rear window
BMW AG - TIS
19.01.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
