3 Series E46 316i (M43TU) SAL
When reusing the rear window:
Remove glue residue on windshield
with a scalpel (1) for heavy-duty applications
to approx. 0.5 mm.
Fit seal (1) at top in center of rear window and press downwards.
Note:
Sealing strip (1) and rear window are marked in center (2).
Secure cable (1) (rear window heating/antenna) with adhesive
tape.
Treat rear window around glued area (A) with materials approved
by BMW (repair kit, sourcing reference: BMW Parts Service),
refer to 51 31 ...
Note:
Note ventilation time!
Distance (A) from seal.
(A) = 15
-2
mm (top/side)
(A) = 20
-2
mm (bottom)
Caution!
The basic filler must have hardened!
Mask headlining on roof connection with paintwork masking
tape.
Treat body in glued area with materials approved by BMW (repair
kit, sourcing reference: BMW Parts Service),
refer to 51 31 ...
Note:
Note ventilation time!
RA Removing and installing rear window
BMW AG - TIS
19.01.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
